ALO Photo Sphere Boxes
Unpacking & Installation Guide
Remove the left side panel, right side panel with lights control box and accessories.
Fix one spacer using the 4 screws on the left side panel.
Once the spacers are fixed to the left side panel, add the right side panel (with lights control box) using the remaining screws.
Remove the two hemisphere.
Remove the central belt, 5 turn tables and the external spot light with mirror panels.
Place the central belt in the appropriate joints.
Make sure to match the holes with the pins in both side panels. Fix the shaft only in the right side panel using an Allen key n°4.
Run the cable from the right side panel through the central belt and place it inside the hole, in the support with motor.
Under, connect the cable to the motor.
Matte and Glossy White
Matte and Glossy Black
Glossy White (both sides)
Each turntable has a small dot in the center to ease up the object center placement. We would like to suggest to use the transparent turn-table as default, in order to get pictures directly in white background and place the other turn tables over it the to create different effects such as reflection or shadow.